The CliQ M series from Delta Electronics Inc. - compact DIN-rail power for tight control cabinets

Reviewed: ad hoc news New Release & Launch desk. Edited and checked on 2026-06-30, 04:27. Details in the imprint.

The CliQ M series from Delta Electronics sits on the DIN rail like a narrow metal spine, its ribbed housing cool to the touch as the control cabinet fans hum around it. An engineer clips it into place with a firm click and watches the status LED glow quietly green.

What the CliQ M does

Delta Electronics positions the CliQ M family as industrial DIN-rail switching power supplies, spanning typical outputs from around 120 W up to roughly 480 W depending on model. Designed for 24 V and other standard DC rails, they feed PLCs, sensors and actuators in factory automation.

The series targets harsh environments, so the housings are typically metal, the units are tested for vibration and shock, and many variants offer operating temperature ranges that reach from roughly -25 °C up to +70 °C. That helps cabinet builders keep one line of supplies across cold warehouses and warm production floors.

Form factor and handling

On the rail the CliQ M modules feel compact and tidy, saving width compared with older bulkier supplies. Installers route cables through screw terminals on the front, tightening them with a small screwdriver until the copper no longer moves.

Many Delta supplies in this class include front-mounted adjustment dials for fine-tuning the output voltage, plus LED indicators and sometimes relay contacts for status signaling. That combination lets integrators see at a glance whether the DC bus is healthy, without opening a laptop.

Electrically speaking

Electrically the CliQ M portfolio is built for wide AC input ranges so one unit can serve multiple regions, from roughly 85 VAC up to 264 VAC in typical universal-input designs. That matters when machine builders ship the same line to Europe, Asia and the Americas.

Short-circuit and overload protection are standard, and many units offer power-boost functions that temporarily raise the available current to start motors or handle inrush loads. In practice that helps keep the DC bus from sagging when a conveyor starts or a cluster of valves energizes at once.

Where it fits in the cabinet

When system integrator Lin Wei plans a small packaging line, she often lines up one or two CliQ M supplies on the top DIN rail, above the PLC and safety relays. Under them sit IO modules that draw their 24 V from the same DC bus.

Because the housing depth is moderate, cabinet doors still close easily even when wiring ducts are full. The tactile ridges along the case make it easier to grip the unit during installation, a small but practical detail when working with gloves.

Industrial use cases

Delta Electronics markets its DIN-rail supplies for factory automation, process control and building automation. That means CliQ M units end up in conveyors, bottling lines, HVAC control cabinets and elevator systems where stable DC power is more important than headline efficiency numbers.

In many of these environments downtime is costly, so integrators pick families like CliQ M that combine conservative thermal design with certifications relevant to industrial use, such as UL and CE on many models. That reduces paperwork and speeds approvals with inspectors.

Compared with older supplies

Compared with older linear supplies or first-generation switching units, modern DIN-rail series like CliQ M typically offer higher efficiency and less heat, which translates into cooler cabinets and longer component lifetimes. They also usually bring better power-factor characteristics to the AC side.

Engineers who have replaced aging supplies with newer Delta units describe a quietly convincing improvement: the cabinet interior runs cooler, fans cycle less often and thermal alarms become rarer, even though the footprint on the rail has shrunk.

Noise and thermal behavior

While the CliQ M housing itself does not have moving parts, the way it handles heat matters. With higher efficiency and derating curves that allow operation at elevated temperatures when ventilated, cabinet designers can keep fan noise lower around the equipment.

On a running line the hum that operators hear usually comes from motors and fans, not from the supplies themselves. For technicians doing maintenance, that quieter background makes it easier to listen for relays and contactors when tracing a fault.

Launch timing and evolution

Delta Electronics has been expanding its DIN-rail portfolio for years, with series like CliQ and CliQ M refreshing the range as industrial customers look for narrower widths and better efficiency. Individual models in the CliQ M line arrived in different waves rather than a single launch day.

For investors and engineers, the pattern is consistent: Delta adds higher-wattage variants, fills gaps in voltage options and refines mechanical details such as mounting clips and terminal labeling, keeping the range relevant as cabinets become more crowded.

Price positioning and availability

Pricing for CliQ M units depends heavily on wattage and region, but they usually sit in the mid-range of industrial DIN-rail supplies rather than at the rock-bottom end. Machine builders often buy them through local automation distributors or online industrial catalogs rather than consumer channels.

In the home market and across Asia and Europe, many models are available through specialist resellers that stock Delta drives, PLCs and power supplies together. That bundling lets integrators keep a consistent vendor across multiple layers of the control stack.

Strengths and weak points

The strengths of a family like CliQ M lie in its compact footprint, robust metal housings and broad input ranges. For many users the relatively quiet thermal behavior and clear front-panel indicators are also welcome, simplifying troubleshooting.

The trade-offs are typical of industrial supplies: optimizer engineers who want detailed digital telemetry on the DC bus may prefer units with integrated communication interfaces, while CliQ M focuses on simple analog and relay signaling rather than full-blown data links.

Human factor and design choices

Delta Electronics founder and chairman Bruce C.H. Cheng has long emphasized energy efficiency and reliability in the company’s product lines. Power-supply families like CliQ M embody that focus in everyday details such as derating curves and component choices.

Within the product teams, designers lean on standardized mechanical formats so electricians do not have to relearn mounting techniques. That quiet, self-assured design language runs through many Delta cabinets and helps field workers feel at home even with new models.

Risk, redundancy and planning

In safety-critical applications integrators often pair DIN-rail supplies in redundant configurations, either with simple diodes or with dedicated redundancy modules. CliQ M units can be wired into such schemes to keep a DC bus alive if one supply fails.

That approach spreads risk and also allows planned maintenance windows: technicians can swap one supply while the other carries the load, avoiding unplanned downtime. For factories running three shifts, that flexibility matters at least as much as headline efficiency figures.

Investor angle and shares

Delta Electronics connects its industrial power solutions to a broader strategy around automation, data centers and energy management, helping diversify revenue beyond consumer-facing products. The company’s shares (ISIN TW0002308004) trade primarily on the Taiwan Stock Exchange in New Taiwan dollars, with the share price watched by investors who follow Asian industrials.

This article was AI-assisted and editorially reviewed. Product information without guarantee; prices and availability may change at short notice. No investment advice, no buy or sell recommendation. Stock-market transactions involve risks up to total loss.

en | TW0002308004 | DELTA ELECTRONICS | boerse | 69656583 | bgmi