Baseus Rapid Series 3-in-1 Cable CAMLT-SC09 1.5m - USB-C Input With 20W PD Fast Charging

Baseus Rapid Series 3-in-1 Fast Charging Data Cable CAMLT-SC09, 1.5m, is a braided USB-C cable that splits into USB-C, Lightning and Micro-USB ends to power several mobile devices from a single charger at up to 20W PD output.

Design, Connectors And Core Specs

The Rapid Series CAMLT-SC09 cable uses a USB-C input plug and three output connectors: USB-C, Lightning and Micro-USB, designed to charge phones, tablets and accessories that use these ports from one cable instead of three separate leads. The CAMLT-SC09 listing specifies USB-C input and Micro USB + Lightning + USB-C outputs. The total cable length is 1.5m, giving enough reach between a USB-C charger and devices on a desk or bedside table without leaving large coils of spare cable. The same source lists the length as 1.5m. The cable jacket uses an aluminum alloy housing around the plugs and a nylon braided outer layer to improve abrasion resistance compared with simple PVC cables, while the internal conductors are designed for 3.5A total current. Product data mention aluminum alloy plus nylon and 5V 3.5A total output

Baseus targets users who need one cable near a USB-C charger that can handle several everyday devices, so the Rapid Series cable supports PD 20W and PD 18W for compatible smartphones. The spec sheet states power as PD 20W, compatible with PD 18W The Lightning branch of the cable supports data transfer up to 480Mbps, allowing phone backup or sync while charging through the same connector. The listing notes up to 480Mbps on the Lightning connector

Charging Performance And Multi-Device Use

For fast charging, the CAMLT-SC09 cable is specified for PD 20W, which matches typical modern smartphone fast charge profiles when connected to a compatible USB-C power adapter that supports PD 20W or higher. The Rapid Series 3-in-1 Fast Charging Data Cable is described with PD 20W support The total output across Micro-USB, Lightning and USB-C ends is rated at 5V 3.5A, so when multiple devices are connected at once the cable can distribute current up to this combined limit, which is typical for a shared multi-head USB-C cable in this category. Product data list total output at 5V 3.5A

Because the Lightning connector supports data transfer speeds up to 480Mbps, the CAMLT-SC09 can serve as both a charging cable and a data cable between a USB-C device such as a laptop or USB-C hub and an iPhone or iPad that uses Lightning. The spec notes data transfer via Lightning only, up to 480Mbps Micro-USB and USB-C connectors on the outputs focus on charging, supporting phones, wireless earbuds cases, power banks and small accessories that use those ports.

Build Quality, Materials And Durability

The Rapid Series CAMLT-SC09 cable relies on a braided nylon outer jacket combined with aluminum alloy connector shells to resist wear in daily bending and coiling, a common upgrade over basic rubberized cables. The product listing describes the material as aluminum alloy + nylon braided The cable is available in colors such as red, with the braided finish offering a tactile grip and visual contrast compared with smooth black PVC cables, which can matter for users identifying cables around multi-port chargers.

Internal construction is designed to handle PD 20W charging and shared current up to 3.5A at 5V, so the conductors and insulation must balance flexibility with heat resistance under sustained load from a USB-C charger. The PD 20W and 5V 3.5A total output values are specified for the cable The strain relief zones near each connector are visibly reinforced to help reduce the risk of fraying where cables typically fail first, matching what is commonly expected on midrange accessory cables in this segment.

Comparison With Other Baseus 3-in-1 Cables

Baseus offers several 3-in-1 cables with different lengths and power ratings, so placing the Rapid Series CAMLT-SC09 beside other options clarifies its position. The Superior Series 3-in-1 cable with 3.5A current and 1.5m length uses a USB-A input and also offers Lightning, Micro-USB and USB-C outputs, but focuses on shared 3.5A current with 480Mbps data transfer on Lightning rather than PD 20W from a USB-C input. A separate Rapid Series listing shows USB-C input and Micro USB + Lightning + USB-C outputs with PD 20W support The Superior Series 3-in-1 cable is specified at 3.5A maximum current and 480Mbps data transfer on Lightning

Another nearby cable line, Flash Series 2 3-in-1, supports higher power cases such as 100W charging on the USB-C branch to laptop-class devices together with Lightning and Micro-USB connectors, and still uses a 1.5m length. A Flash Series 2 3-in-1 cable is listed with USB-C, Lightning and micro USB connectors and up to 100W charging Compared with this 100W option, the Rapid Series CAMLT-SC09 is positioned for phone and small tablet charging at PD 20W rather than notebook-class power levels, but it keeps the same 1.5m reach and 3-in-1 versatility.

Use Case And Verdict For US Buyers

Within the category of USB-C multi-head charging cables, the Baseus Rapid Series 3-in-1 Fast Charging Data Cable CAMLT-SC09, 1.5m, suits users who plug a PD-capable USB-C charger into one outlet and want one braided cable to reach multiple devices on a table or in a travel bag, with up to 20W PD charging and 3.5A total current across USB-C, Lightning and Micro-USB ends. The CAMLT-SC09 spec table summarizes PD 20W, 5V 3.5A output, USB-C input and three outputs, 1.5m length and braided construction Compared with single-port USB-C cables, the Rapid Series model trades maximum laptop-charging wattage for the convenience of powering several lower-draw devices at once, which fits multi-device phone and accessory setups more than notebook-only scenarios.